21503936 | Genuine Volvo® Aftertreatment DPF Injector
21503936 | Genuine Volvo® Aftertreatment DPF Injector is backordered and will ship as soon as it is back in stock.
365-day / 100,000-mile limited warranty on U.S. orders. Return conditions apply. Mandatory legal rights remain unaffected.
Couldn't load pickup availability
Need a quote?
Need a quote?
Need help with fitment or a quote? Include your part number and vehicle details.
An Aftertreatment DPF injector 21503936 (also called a hydrocarbon doser, fuel doser, or 7th injector) is a component in a diesel engine's emissions system that injects a small amount of diesel fuel into the exhaust stream to help clean the Diesel Particulate Filter (DPF). Aftertreatment DPF Injector For Volvo engines: D11H, D13H, MP7, MP8
General Specifications
| Condition | New |
|---|---|
| Part Number | 21503936 |
| Brand | Volvo |
| Fits | trucks equipped with the following engines |
Fitment
| Manufacturer | Vehicle | Engine |
|---|---|---|
| Volvo Trucks | VNL | D11H, D13H |
| Volvo Trucks | VNR | D11H, D13H |
| Volvo Trucks | VHD | D11H, D13H |
| Volvo Trucks | VAH | D11H, D13H |
| Mack Trucks | Anthem | MP7, MP8 |
| Mack Trucks | Pinnacle | MP7, MP8 |
| Mack Trucks | Granite | MP7, MP8 |
| Mack Trucks | TerraPro | MP7, MP8 |
Fitment can vary by engine build and options. Match the part number on the part you are replacing, or contact us with your vehicle details before ordering.
Purpose & Function
-
Regenerate the Diesel Particulate Filter (DPF):
- The injector sprays diesel fuel into the exhaust stream.
- The fuel reaches the Diesel Oxidation Catalyst (DOC), where it oxidizes and raises the exhaust temperature.
- The higher temperature burns the soot trapped in the DPF, converting it into ash.
-
Prevent DPF clogging:
- Regular regeneration keeps soot from accumulating.
- This maintains exhaust flow and helps avoid excessive backpressure.
-
Maintain engine performance:
- A clean DPF allows the engine to breathe properly.
- This helps prevent power loss and engine derate caused by a restricted exhaust.
-
Reduce emissions:
- By enabling proper DPF regeneration, the injector helps the vehicle meet emissions regulations by reducing particulate matter (soot).
Signs of a Bad Aftertreatment DPF Injector
1. Frequent or failed DPF regenerations
- Truck tries to regen more often than normal
- Regeneration cycles fail or don’t complete
- Parked regen may be requested repeatedly
2. DPF warning lights
- “DPF Full” or “Exhaust System” warning on dash
- Check Engine Light (CEL) related to aftertreatment system
3. Engine derate (loss of power)
- Truck goes into reduced power mode
- Speed or torque limitations activated
- Often happens when soot level becomes too high
4. High soot or backpressure readings
- Diagnostic tool shows rapid soot accumulation
- Elevated exhaust backpressure in DPF
5. Excessive fuel consumption
- Increased fuel use due to repeated regen attempts
- Long or unusually frequent active regenerations
6. Fault codes (common examples)
You may see codes such as:
- Aftertreatment fuel dosing valve performance issues
- DPF regeneration insufficient temperature
- Hydrocarbon doser circuit faults
- DOC outlet temperature not reaching target
7. White smoke or fuel smell during regen (sometimes)
- Incomplete atomization of injected fuel
- Fuel may not fully combust in the DOC
8. Soot clogging in DPF despite regens
- DPF continues to load even after regen attempts
- Indicates poor or no fuel dosing into exhaust stream
About Volvo
Volvo is a Swedish multinational company known for manufacturing premium commercial vehicles, including trucks, buses, and construction equipment. Founded in 1927, Volvo is recognized globally for its commitment to safety, innovation, and environmental sustainability. The brand focuses on producing reliable, fuel-efficient, and technologically advanced trucks that serve industries such as transportation, logistics, and construction. Volvo's dedication to quality and cutting-edge technology has made it a trusted name in the heavy-duty vehicle market worldwide.






