45-2361 | Genuine Thermo King® SR3 Microprocessor Board Interface

T-Series units, including:

• • T-680 / T-690
  • T-800 / T-880
  • T-1000 / T-1080 / T-1090
  • Spectrum series units

1. Connect the microprocessor to other components

It provides the pathways for the processor to interact with:

• Sensors (like radar, temperature, speed)
• Actuators (brakes, motors, valves)
• Other control modules

Without this interface, the processor is basically isolated.

2. Enable communication between systems

It handles data exchange using protocols like:

• CAN bus (vehicles)
• Serial communication

This allows different modules in a system to “talk” to each other reliably.

3. Convert and manage signals

Real-world signals aren’t always in a format a processor understands. The interface:

• Converts voltages/signals into readable data
• Ensures signals are stable and accurate

4. Control and coordinate system behavior

It helps the processor:

• Send commands (like applying brakes)
• Synchronize actions between components
• Maintain system timing and logic

5. Protect and stabilize the system

The interface can include:

• Electrical protection (voltage regulation, filtering)
• Error checking and fault handling

Loss of communication

• System reports “No Communication” with a module
• Intermittent connection (works sometimes, then drops)
• Network errors (especially on CAN bus in vehicles)

Intermittent or unpredictable behavior

• System works normally, then suddenly glitches
• Features turn on/off randomly
• Inconsistent performance without a clear pattern

System or feature shutdown

• Entire module stops working
• Safety systems (like collision mitigation) become disabled
• Device won’t initialize or boot properly

False or incorrect signals

• Wrong data being sent or received
• False warnings or alerts
• System reacting when it shouldn’t (or not reacting when it should)

Error codes related to internal faults

Diagnostics may show things like:

• “Internal module fault”
• “Processor/interface error”
• “Data link error”

Power or heat-related issues

• Works when cold, fails when hot
• Random resets or shutdowns
• Burn marks or damaged components (in severe cases)

No response at all (complete failure)

• Module appears “dead”
• No communication, no output
• Requires replacement in most cases