Free help & advice Learn more

International  |  SKU: 5013556R91

5013556R91 | Genuine International® High Pressure Fuel Pump 12.5L

Regular price $1,80900
Shipping calculated at checkout.
ConditionNew
Express payment options

365-day / 100,000-mile limited warranty on U.S. orders. Return conditions apply. Mandatory legal rights remain unaffected.

Need a quote?

Need help with fitment or a quote? Include your part number and vehicle details.

Contact our team

A High Pressure Pump 5013556R91 is a type of pump designed to move fluids—usually fuel or oil—at very high pressure, typically for engines or hydraulic systems that require precision and force. High Pressure Fuel Pump A26 12.5L For International LT Series, RH Series, HX Series, some International HV vocational trucks, certain IC Bus models Engine: I786 A26 12.5L Bill Of Materials:

General Specifications

Condition New
Part Number 5013556R91
Brand International®
Fits International LT Series, International RH Series, International HX Series, some International HV vocational trucks, certain IC Bus models using the A26 engine
Name Quantity Part Number
SEAL BS-16 7X24 0-ST/FPM1-80 4 06566310107
O-RING HP FUEL PUMP 1 1882675C1
WASHER, FLAT 1 26272R1
TUBE, ASSEMBLY HP PUMP TO RAIL 1 3014964C91
PUMP, HIGH PRESSURE FUEL 1 7096771C91
BOLT SPECIAL 7/16"-20" 1 3535854C1
NUT, LOCK ENGINE SUPPORT SHAFT 7/16" UNF 7/16" NF 1 273896

Purpose & Function

1. Power the Injectors (in HEUI Systems)

  • The High Pressure Oil Pump (HPOP) creates oil pressure (up to ~3,000 psi).

  • That oil pressure drives the fuel injectors, which inject fuel into the combustion chamber.

  • Without this pump, the engine cannot inject fuel or run.

2. Enable Precise Fuel Injection

  • Electronic control modules regulate injection timing/amount by controlling high-pressure oil.

  • This allows for better fuel efficiency, lower emissions, and smoother operation.

3. Cold Start Assistance

  • Cold engines require higher oil pressure to fire injectors.

  • The HPOP ensures there's enough pressure even during cranking.

4. Supports Emissions Control

  • Precise fuel metering via high-pressure injection helps the engine burn cleaner.

Signs of a Bad High Pressure Fuel Pump

  • Hard Starting or No Start

    • Cranks, but doesn't fire—especially when cold.

    • Not enough oil pressure to activate injectors.

  • Loss of Power

    • Feels sluggish, won’t rev properly, lacks acceleration.

    • Can’t maintain required oil pressure under load.

  • Stalling

    • Engine starts but then dies, especially at idle or low RPM.

  • Engine Misfires or Rough Idle

    • Inconsistent firing due to poor injector operation.

  • Low ICP (Injection Control Pressure) Readings

    • Diagnostic scan shows low pressure from HPOP (even when IPR is commanding high pressure).

  • Check Engine Light / Trouble Codes

    • Codes like:

      • P1211, P1283 – ICP out of range

      • P2290, P2291 – Injector control pressure too low

      • P1212 – ICP not at expected level

  • Oil Leaks

    • Leaks from the HPOP housing, fittings, or lines.

  • High IPR % with Low ICP

    • If the IPR (Injection Pressure Regulator) is near 100% but ICP (Injection Control Pressure) is low, the HPOP is likely failing.

About International / Navistar

International, a brand of Navistar International Corporation, is a leading American manufacturer of commercial trucks, buses, and diesel engines. With a history dating back to the early 1900s, International is known for producing durable and reliable vehicles used in freight, construction, and municipal operations.

Navistar has built a strong reputation in the trucking industry by focusing on innovation, performance, and long-term dependability. Their vehicles and components are trusted by fleets and drivers across North America and beyond.